Remote Control - Strong SRT 5406 User Manual

、Note the presence of this symbol on the rear panel. This indicates that
important operating and maintenance instructions accompany the
product. These are set out in this manual. It is highly recommended that
you read this manual thoroughly before using the product.
To reduce the risk of electric shock, do not remove any panel of
the
within it that are of sufficient magnitude to constitute a risk of electric
shock.

Remote Control

1. STANDBY: To switch to stand-by mode when
the receiver is on (or vice versa)
2. Numeric Keys (0–9): To choose a channel
directly, or to enter numeric information in a
menu
3. TV/RAD: To switch between TV and radio
(and vice versa)
4. EPG (Electronic Program Guide): To show
the TV and radio program guide
5. MENU: To display the main menu, or return to
a previous menu
6. CH (▲/▼): To change the channel, or to
move the cursor up or down in a menu
7. VOL ( / ): To change the volume in
viewing mode, or to change an option or
setting in a menu
. Even when the unit is turned off, voltages may be present
8. OK: To show the channel list in viewing mode,
and to select an item (or confirm a choice) in
a menu
9. FAV: To display the favourites list in viewing
mode, and to select a favourite
10. RECALL: To return to the previous channel or
station
11. SUB: To turn subtitles on or off
12. AUDIO: To choose speakers (left, right or
stereo), audio format and audio language
13. MUTE: To turn the sound on or off
14. FORMAT: To cycle through the video
definitions: 576i, 576p, 720p and 1080i
15. INFO: To show information about the current
program
8