Strong SRT 5406 User Manual page 33

5. Press to select the Status field.
CH
6. If you are setting a new timer, the Status field will read Disable. Press
this setting to Enable.
7. If you have selected a timer that has already been set and want to cancel it, press
to change the Status setting to Disable. Press the SUB button on the remote control to
VOL
save your change, and then ignore the rest of this procedure.
8. All the timer options should now be available to you (see below). Press
option. You can set the timer to activate only once, every day or every week. Press
until the cycle option you want is displayed.
VOL
9. Press to select the Timer Service option. You can set the timer to come on (Wake Up) or
CH
turn off (Sleep). Press
10. Press . If you chose One Time or Every Week for the Cycle option, the Date option will now
CH
be selected. Use the number keys on the remote control to enter the date this timer will
activate (or first activate) and then press
11. Depending on what option you chose for Timer Service at step 9, the option now selected will
either be labelled Wake Up or Sleep Time. Use the number keys on the remote control to enter
the time you what the
Note that times must be entered using the 24-hour clock format. For example, 8 o'clock in the
morning is entered as 0800, while 8 o'clock in the evening is entered as 2000.
12. If you chose Wake Up for Timer Service at step 9, the Channel option will now be highlighted. If
you want to change the channel currently shown, press
or until the timer service option you want is displayed.
VOL VOL
CH
to turn on or turn off and then press
.
or
VOL VOL
33
or to change
VOL VOL
or
VOL
to select the Cycle
CH
or
VOL
.
CH
until the channel you