Rescanning For Channels And Stations - Strong SRT 5406 User Manual

Rescanning for channels and stations

The Install option on the main menu enables you to scan for—that is, detect—digital TV and radio
stations available in your area. You will need to rescan if new channels or stations become
available, if you want to reinstate a channel or station you have deleted, or if you move to a new
location.
There are two scanning options:
• Auto Search
The will automatically search for all digital TV and radio stations it can detect and
store their details.
• Manual Search
This option lets you search for a particular channel (or all channels from a specified
broadcaster).
Automatic Search
1. Press MENU on the remote control.
2. If Install is not highlighted on the main menu, press
The Install sub-menu appears.
3. If Auto Search is not highlighted on the sub-menu, press
The Auto window appears, and the search begins automatically. When the search is finished, a
channel that has been found will begin playing.
Manual Searching
NOTE: Automatic searching (described above) is suitable in most cases. You might use
manual searching if you have deleted a channel and now want to access it again. In this
case, you would just search for that particular channel.
1. Press MENU on the remote control.
2. If Install is not highlighted on the main menu, press
The Install sub-menu appears.
3. If Manual Search is not highlighted on the sub-menu, press
OK.
The Manual Search window appears.
or until it is and then press OK.
CH CH
or
CH CH
or until it is and then press OK.
CH CH
or
CH CH
25
until it is and then press OK.
until it is and then press