Custom Panel Dimensions - KitchenAid P6GEG2KL Use & Care Manual

If you plan to install a custom overlay panel, you will need to
make the panel yourself or consult a qualified cabinetmaker or
carpenter.
IMPORTANT:
The thickness of the overlay panel must be
Overlay panel must not weigh more than 8 lbs (3.62 kg).
Overlay panels weighing more than recommended may
cause damage to your ice maker.
Match wood grain direction with that of adjacent cabinets.
Sand panel edges to provide a smooth finish.
Use moisture sealer on both sides and all edges of the panel
to avoid damage from moisture.
Option 1—Without Hinge-Side Spacer
To allow proper clearance for the door, prepare the custom
overlay panel using the dimensions shown.
"
(3.18 cm)
"
(1.91 cm)
"
(6.35 mm)
4

Custom Panel Dimensions

" (1.91 cm).
29 "
(74.9 cm)
14 "
(36.9 cm)
"
(3.18 cm)
"
(1.91 cm)
Option 2—With Hinge-Side Spacer
To achieve a flush installation with adjacent cabinets, prepare the
custom overlay panel using the dimensions shown.
Front of Panel
Top of Panel
Bottom of Panel
"
(6.35 mm)
14 "
(37.1 cm)
A
A. Front—visible surface when installed
B. Hinge side
C. Notch to a depth of " (0.95 cm)
A
A. Front—visible surface when installed
B. Hinge side
C. Notch to a depth of " (0.95 cm)
"
(0.95 cm)
29 "
(74.9 cm)
"
(0.95 cm)
"
(3.18 cm)
"
(1.27 cm)
B C
B C
"
(1.27 cm)
"
(3.18 cm)