Aastra Dialog 4223 Professional User Manual page 60

Message Services
MSG+DISC
NEXT
SELECT
CONFIRM
60
Sending a Mini-Message
Suppose you attempt to contact someone who either does not
answer his/her extension, or whose extension is busy.
Over and above the other operations available to you during outgoing
calls (see "Operations for Outgoing
end your call by sending a mini-message to the called extension,
if it is compatible with this service.
To do so, no matter what the status of the requested party:
L1 SMITH Peter-405
WAIT
DTMF
>>
Press the Next key to display the following screen:
L1 SMITH Peter-405
WAIT
Then press the dynamic function key shown on the left.
Your extension then prompts you to select the mini-message to
send to your party.
L1 SMITH Peter-405
0 -> HAS CALLED YOU BACK
SELECT
Press the dynamic function key shown on the left.
This will allow you to scroll through the various available mini-
messages. By default, the messages available are: "HAS CALLED
YOU BACK", "WILL CALL BACK" and "WOULD LIKE TO SEE
YOU" (see also other messages available, described later).
Press the dynamic function key shown on the left to select
the mini-message to send.
Your extension's screen displays the following:
L1 SMITH Peter-405
WOULD LIKE TO SEE YOU
Press the dynamic function key shown on the left to validate
your selection.
This ends your call immediately upon sending the associated mini-
message.
Calls" section), you may also
CALL_BACK
MSG+DISC
NEXT
CONFIRM
MD Evolution – Dialog 4223 Professional
FLASH >
<
RETURN
RETURN