Aastra Dialog 4223 Professional User Manual page 113

79
OLD PSWD
NEW PSWD
d í
or
MD Evolution – Dialog 4223 Professional
z
To do this, after lifting the handset or in handsfree mode:
Dial the prefix assigned to the user password management
service.
By default, the prefix is "79", however this may have been modified.
Your extension prompts you to enter your user password.
FRI 20-APR 15:28
L1 Password _
z
Enter your current user password.
By default, your user password is "1234", however you may have
modified it; if this is indeed the case, you will need to enter your
z
current password.
Next, enter your new user password.
It may contain any 4 digits, or the * and # characters. You will
receive confirmation that your new password has been saved.
FRI 20-APR 15:28
L1 PASSWORD REGISTERED
Replace the handset or press the "C" key to end the service
in handsfree mode.
Note: If you ever forget your password, you can request
that it be re-initialised, either by a facility attendant, or by the
system administrator. It will then be reset to "1234" until you
change it once again.
Consulting Your Facility's Dialling Plan
Your extension's screen and dynamic function keys will guide you
through the process of carrying out the many services to which you
have access.
However, certain services require that you dial an external access
prefix beforehand, which you obviously will need to remember.
If you forget the prefix, your extension's Menu key will allow you to
consult the internal dialling plan for your facility.
Programming Your Extension
113