Make Electrical Connection; Complete Installation - KitchenAid 30" (76.2 CM) RANGE HOOD Installation Instructions And Use & Care Manual

Make Electrical Connection

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1. Disconnect power.
A
B
C
D
A. White wires
B. Black wires
C. UL listed wire connectors
D. Green (or bare) and yellow-green ground wire
E. Home power supply cable
F. UL listed or CSA approved ½" strain relief
2. Use UL listed wire connectors and connect the black wires
(B) together.
12
3. Use UL listed wire connectors and connect the white wires
4. Connect green (or bare) ground wire from home power supply
E
5. Install terminal box cover.
6. Reinstall the rear support.
7. Reinstall the 2 lateral supports.
8. Check that all light bulbs are secure in their sockets.
9. Reconnect power.
F
For Vented Installations Only:
1. Replace grease filters. See the "Range Hood Care" section.
2. Check the operation of the range hood fan and light. See
NOTE: To get the most efficient use from your new range hood,
read the "Range Hood Use" section.
(A) together.
WARNING
Electrical Shock Hazard
Electrically ground blower.
Connect ground wire to green and yellow ground wire
in terminal box.
Failure to do so can result in death or electrical shock.
to the yellow-green ground wire (D) in the terminal box using
UL listed wire connector.
Connect ventwork to hood. Seal joints with clamps to
make secure and airtight.

Complete Installation

"Range Hood Use" section.
If range hood does not operate, check to see whether a
circuit breaker has tripped or a household fuse has blown.
Disconnect power and check wiring connections.