Make Electrical Connection; Complete Installation; Range Hood Use - KitchenAid LI32ND/W10674120D Installation Instructions And Use & Care Manual

30" 76.2 cm and 36" 91.4 cm range hood
Table of Contents

Advertisement

Available languages

Available languages

Make Electrical Connection

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1. Disconnect power.
A
B
C
D
A. White wires
B. Black wires
C. UL listed wire connectors
D. Green (or bare) and yellow-green ground wire
E. Home power supply cable
F. UL listed or CSA approved ½" strain relief
2. Use UL listed wire connectors and connect the black
wires (B) together.
3. Use UL listed wire connectors and connect the white
wires (A) together.
WARNING
Electrical Shock Hazard
Electrically ground blower.
Connect ground wire to green and yellow ground wire
in terminal box.
Failure to do so can result in death or electrical shock.
4. Connect green (or bare) ground wire from home power
supply to the yellow-green ground wire (D) in the terminal
box using UL listed wire connector.
5. Install terminal box cover.
6. Reconnect power.
For optional power cord kit installations, follow the instructions
supplied with the power cord kit. See the "Assistance or
Service" section for information on ordering.
NOTE: Use only with range hood cord connection kits that have
been investigated and found acceptable for use with this model
range hood.
1. Replace grease filters. See the "Range Hood Care" section.
2. Check the operation of the range hood fan and lights. See
NOTE: To get the most efficient use from your new range hood,
read the "Range Hood Use" section.
E
The range hood is designed to remove smoke, cooking vapors
and odors from the cooktop area. For best results, start the hood
before cooking and allow it to operate several minutes after
the cooking is complete to clear all smoke and odors from the
kitchen.
F
The hood controls are located on the center of the range hood.
Control Panel
Optional Power Cord Kit Installations

Complete Installation

"Range Hood Use" section.
If range hood does not operate, check to see whether a
circuit breaker has tripped or a household fuse has blown.
Disconnect power and check wiring connections.

RANGE HOOD USE

D
A. LED lamp housings
B. Grease filter handle
A
B
A. Power decrease
B. Power increase
A
C
B
C. Blower and light controls
D. Grease filter
C
D
C. Display
E. Timer
D. Light
E
11

Advertisement

Table of Contents
loading

Table of Contents