Technical Data - Hilti WSJ 750 Operating Instructions Manual

Emptying the dust container
Dust may be released into the air when
emptying the dust removal module.
Dust may be harmful to the respira-
tory system.
Wear breathing protection.
-NOTE-
Hold the dust removal module so that the dust removal
adaptor faces upwards.
1. Unplug the supply cord from the electric socket.
2. Press the two buttons on the dust removal module
(one on each side) simultaneously.

4. Technical data

Tool
Nominal power rating
Mains frequency
Nominal voltage
Mains current
Weight of tool
Dimensions
(LxWxH)
Stroke rate
Stroke
Max. cutting depth in wood
Max. cutting depth in aluminium
Max. cutting depth in mild steel
Angular cutting (left / right)
Number of orbital action settings
Blade connection end
Dust removal adapter exterior dia. 30 mm for hose adapter
Double insulated (in accordance with EN 50144)
Vibration-absorbing grip
Interference immunity
Radio and television interference suppression
Noise and vibration information (measured in accordance with EN 50144)
Typical A-weighted sound power level (L
Typical A-weighted sound pressure level (L
Wear ear protection!
Typical weighted vibration at the grips:
Right of technical changes reserved!
-CAUTION-
WSJ 750-ET
750 W
50 / 60 Hz
110 V
7.5 A
2.6 kg
256x75x201 mm
900–3000 1/min.
28 mm
up to 120 mm
up to 25 mm
up to 10 mm
0–45°
0-1-2-3
T-shank
):
wA
):
pA
3. Pull the dust container downwards away from the tool.
4. Empty the dust out of the container by tapping it light-
ly or, alternatively, use a vacuum cleaner to clean out
the container (wear breathing protection).
3.1.6 Care and maintenance
We recommend use of compressed air and a cloth for
cleaning the dust removal module. Do not use water, oil,
grease or cleaning agents.
3.1.7 Changing and cleaning the filter
Change the filter if it becomes defective or if so badly
soiled that cleaning is no longer possible. Disassemble
it to facilitate thorough cleaning. Especially after cutting
plaster or plasterboard (drywall panel), the filter should
be cleaned thoroughly to ensure no loss of suction power
by the dust removal system. Clean the filter carfully, using
compressed air or a vacuum cleaner.
WSJ 750-EB WSJ 850-ET
750 W 850 W
50 / 60 Hz 50 / 60 Hz
230 V 110 V
3.8 A 8.0 A
2.5 kg 2.6 kg
256x75x194 mm 256x75x201 mm
900–3000 1/min. 900–3000 1/min.
28 mm 28 mm
up to 120 mm up to 150 mm
up to 25 mm up to 25 mm
up to 10 mm up to 10 mm
0–45° 0–45°
0-1-2-3 0-1-2-3
T-shank T-shank
rotection class II (double insulated) Z
p
In accordance with EN 55014-2
In accordance with EN 55014-1
101 dB (A) WSJ-EB / 100 dB (A) WSJ-ET
88 dB (A) WSJ-EB /
3.1 m/s 2 WSJ-EB / 3.0 m/s
WSJ 850-EB
850 W
50 / 60 Hz
230 V
4,.1 A
2.5 kg
256x75x194 mm
900–3000 1/min.
28 mm
up to 150 mm
up to 25 mm
up to 10 mm
0–45°
0-1-2-3
T-shank
87 dB (A) WSJ-ET
2 WSJ-ET
en
15