Disposal; Warranty - Hilti WSJ 750 Operating Instructions Manual

10. Disposal

Most of the materials from which Hilti electric tools are manufactured can be recycled. The materials must be
correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking
back your old electric tools for recycling. Please ask your Hilti customer service department or Hilti representa-
tive for further information.
Should you wish to return the electric tool yourself to a disposal facility for recycling, proceed as follows:
Dismantle the electric tool as far as possible without the need for special tools. Use absorbent paper to wipe oily
parts clean and to collect any grease that runs out (total quantity approx. 50 ml). This paper should also be disposed
of correctly. On no account should oil or grease be allowed to enter the waste water system or to find its way
into the ground.
The individual parts should be separated as follows:
Part / assembly
Toolbox
Gear housing
Grip
Motor housing
Fan
Motor (rotor and stator)
Supply cord
Gearing parts
Main switch, electronics
Baseplate (WSJ 750-EB/- ET)
Baseplate (WSJ 850-EB/-ET)
Baseplate cover
Anti-splinter insert
Dust removal adaptor
Screws, small parts
Operating instructions

11. Warranty

Hilti warrants that the tool supplied is free of defects in
material and workmanship. This warranty is valid as long
as the tool is operated and handled correctly, cleaned
and serviced properly and in accordance with the Hilti
operating instructions, all warranty claims are made with-
in 12 months (unless other mandatory national regulations
prescribe a longer minimum period) from the date of the
sale (invoice date), and the technical system is main-
tained. This means that only original Hilti consumables,
components and spare parts may be used in the tool.
This warranty provides the free-of-charge repair or replace-
ment of defective parts only. Parts requiring repair or
replacement as a result of normal wear and tear are not
covered by this warranty.
Additional claims are excluded, unless mandatory
national rules prohibit such exclusion. In particular,
Hilti is not obligated for direct, indirect, incidental or
consequential damages, losses or expenses in con-
22
Main material
Plastic
Plastic with magnesium alloy / brass parts
Plastic
Plastic
Plastic
Steel and copper
Copper, elastomer
Metal
Steel
Cast aluminium and steel
Plastic
Plastic
Plastic
Steel
Paper
nection with, or by reason of, the use of, or inability to
use the tool for any purpose. Implied warranties of
merchantability or fitness for a particular purpose are
specifically excluded.
Send the tool and/or related parts immediately upon dis-
covery of a defect to the local Hilti marketing organisa-
tion for repair or replacement.
This constitutes Hilti's entire obligation with regard to
warranty and supersedes all prior or contemporaneous
comments and oral or written agreements concerning
warranties.
Recycling
Plastics recycling
Scrap metal
Plastics recycling
Plastics recycling
Plastics recycling
Electronic scrap
Electronic scrap
Scrap metal
Electronic scrap
Scrap metal
Scrap metal
Plastics recycling
Plastics recycling
Plastics recycling
Scrap metal
Paper recycling