Disposal; Warranty - Hilti ST1800 Operating Instructions Manual

9. Disposal

Most of the materials from which Hilti electric tools are manufactured can be recycled. The materials must be
correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking
back your old electric tools for recycling. Please ask your Hilti customer service department or Hilti representa-
tive for further information. Should you wish to return the electric tool yourself to a disposal facility for recycling,
proceed as follows: Dismantle the electric tool as far as possible without the need for special tools. Use absorbent
paper to wipe oily parts clean and to collect any grease that runs out (total quantity approx. 50 ml). This paper
should also be disposed of correctly. On no account should oil or grease be allowed to enter the waste water
system or to find its way into the ground.
The individual parts should be separated as follows:
Part / assembly
Toolbox
Gear housing
Bearing plate
Motor housing
Grip cover
Fan
Motor (rotor and stator)
Supply cord
Gearing parts
Screws, small parts

10. Warranty

Hilti warrants that the tool supplied is free of defects in
material and workmanship. This warranty is valid as long
as the tool is operated and handled correctly, cleaned
and serviced properly and in accordance with the Hilti
operating instructions, all warranty claims are made with-
in 12 months (unless other mandatory national regula-
tions prescribe a longer minimum period) from the date
of the sale (invoice date), and the technical system is
maintained. This means that only original Hilti consum-
ables, components and spare parts may be used in the
tool.
This warranty provides the free-of-charge repair or replace-
ment of defective parts only. Parts requiring repair or
replacement as a result of normal wear and tear are not
covered by this warranty.
Additional claims are excluded, unless mandatory
national rules prohibit such exclusion. In particular,
Hilti is not obligated for direct, indirect, incidental or
consequential damages, losses or expenses in con-
nection with, or by reason of, the use of, or inability to
use the tool for any purpose. Implied warranties of
merchantability or fitness for a particular purpose are
specifically excluded.
Send the tool and/or related parts immediately upon dis-
Main material
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
Steel and copper
Copper, elastomer
Steel / Aluminium
Steel
Recycling
Plastics recycling
Plastics recycling
Plastics recycling
Plastics recycling
Plastics recycling
Plastics recycling
Scrap metal
Scrap metal
Scrap metal
Scrap metal
covery of a defect to the local Hilti marketing organisa-
tion for repair or replacement.
This constitutes Hilti's entire obligation with regard to
warranty and supersedes all prior or contemporaneous
comments and oral or written agreements concerning
warranties.
en
15