Viewing Operation Data; Selecting Display Item - Mitsubishi Electric PV-PNS03ATL-GER Operation Manual

5.3 Viewing Operation Data

5.3.1 Selecting Display Item

In addition to the operating status illustrated in 5.2, you can monitor a vari-
ety of operation data on the LCD.
(1) Current operation data: output power, input voltage, grid voltage, output
current, (today's) maximum output power, date and time
(2) Total cumulative data: total generated energy, amount, CO
operating hours
(3) Daily operation data: today's generated energy, amount, CO
operating hours, yesterday's generated energy
(4) Monthly operation data: this month's generated energy, amount, CO
reduction, operating hours, last month's generated energy
(5) Annual operation data: this year's generated energy, amount, CO
reduction, operating hours, last year's generated energy
Also, you set information relevant to the items such as date and time while
bringing them up on the LCD.
You can select the items by operating the MODE or SELECT switch.
However, it reverts to STATUS display if 30 seconds and more passe with-
out any actions.
65
reduction,
2
reduction,
2
2
2
pp.1-48
pp.1-48
pp.1-48