Display Of Operation Data - Mitsubishi Electric PV-S4200-IT Operating Manual

5.3 Display of Operation Data

In addition to the operation status displays described above, the LCD screen can also display total cumulative data and
operation data (for today, yesterday, this month, last month, this year, and last year).
The display is locked during normal running in order to prevent abnormal operation. Be sure to release display lock in
order to carry out any operation.
The [SELECT] button can be used after releasing the display lock to switch between display contents.
Caution:
No operation is possible with the display locked.
[SELECT] button (Select)
Touch and release to switch
between screens, move the
« » arrow, or return to the
original screen.
LCD screen
[ENTER] button (Confirm)
Touch and release to
confirm, and move to the
next or previous screen.
Pressing the button
* Touch the button until a "beep" is heard, and then
release the button.
If you continue to press down for 5 seconds,
operation will be disabled.
Releasing the display lock
Example of locked
Display Image
RUNNING
ITA:ENEL GUIDE
TOTAL 11358KWh
OUTPUT 4321W
MAXIMUM 4508W
Touch the [SELECT] or [ENTER]
button for at least 5 seconds.
Release the button when you
hear a pair of beeps in quick
succession and the display
reverses.
If no operation is performed within 2 minutes, the screen will
be automatically locked once again. In addition, the backlight
will turn off and the display reversal will return to normal.
The screens show a typical example of the current
operating status.
44
Beep!
Example of unlocked
Display Image
Reversed
RUNNING
ITA:ENEL GUIDE
screen
TOTAL
OUTPUT
MAXIMUM 4508W
Beep! Beep!
Release
the button
The LCD screen's
backlight turns on.
11358KWh
4321W