Henny Penny OEA/OGA-341 Technical Manual page 40

2-24. AUTOLIFT
ACTUATOR (MOTOR)
REPLACEMENT
(if applicable)
Figure 2-84
Figure 2-85
2-30
8. Remove the 2 top screws securing the support plate and
remove the plate from the unit. Figure 2-84.
9. Using a 15T torx driver, remove the 2 torx screws from
the back shroud, and pull the actuator from the unit.
Figure 2-85.
10. Install new actuator in reverse order.
Model OFE/OFG/OEA/OGA-341, 342
1003