Henny Penny OEA/OGA-341 Technical Manual page 39

2-24. AUTOLIFT
ACTUATOR (MOTOR)
REPLACEMENT
(if applicable)
Figure 2-80
Figure 2-81
Figure 2-82
Figure 2-83
1003
5. Disconnect actuator connector. Figure 2-80.
6. Remove female connector from plate. Figure 2-81.
7. Using 7/16" socket, remove the 4 nuts securing the support
plate. 2 nuts are behind the insulation. Figures 2-82 & 2-83.
Model OFE/OFG/OEA/OGA-341, 342
2-29