Table of Contents
Advertisement
This section describes the functionalities of FGSW-2620 components and guides how to
install it on the desktop or shelf. Basic knowledge of networking is assumed. Please read
this chapter completely before continuing.
2.1 Product Description
The PLANET
FGSW-2620 provides 24 10/100Mbps Fast Ethernet ports with 2
10/100/1000Mbps ports (port 25/26). The two Gigabit ports can be 1000Base-T for
10/100/1000Mbps; the distance can be extended from 100 meters (TP). The Switch
with non-blocking backplane and simplifies the task of upgrading your LAN to cater for
increased bandwidth demand.
2.1.1 Product Overview
PLANET FGSW-2620 is Ethernet Switch with 24 RJ-45 10/100Mbps ports. The Switch also
provides up to two 10/100/1000Mbps ports for cost effective high-performance network
connectivity. With its 8.8Gbps non-blocking switch fabric, the PLANET Switch can also
provide a local, high bandwidth, Fast Ethernet network for your departmental backbone.
This Switch also supports store-and-forward forwarding scheme to ensure low latency
and high data integrity, eliminates unnecessary traffic and relieves congestion on critical
network paths. With an intelligent address recognition algorithm, Switch could recognize
up to 8K different MAC address and enables filtering and forwarding at full wire speed.
2.1.2 FGSW-2620 Front Panel
Figure 2-1 shows front panel of FGSW-2620.
2.1.3 LED Indicators
System
Function
LED
Color
PWR
Green
Lit: Power on.
Per 10/100Mbps port
Function
LED
Color
Lit: indicate the link through that port is successfully established.
LNK/
Green
Blink: indicate that the switch is actively sending or receiving data
ACT
over that port.
Lit: indicate that the port is operating at 100Mbps.
100
Orange
Off: indicate that the port is operating at 10Mbps.
Figure 2-1 PLANET FGSW-2620 Front Panel
2. INSTALLATION
3
Advertisement
Table of Contents
