Basic Operation Method
Cool/Heat/Auto/Fan Operation
Remote Controller Functions
Operation Method
1
Operation screen
display
Describes screens that
will be displayed on the
remote controller in
operation.
Preparation
●
For mechanical protection purposes, turn ON the system at least six hours before starting the
operation of the system.
●
Do not turn OFF the system in season in order to ensure the smooth starting of the system.
Operation Method
1
Cool
Set temperature
28
Return
Setting
14
Operation procedure
Explains a button operation
procedure for the remote controller.
Operate the buttons according to
the procedure.
● Displays the main menu screen.
MainMenu
1/2
Set temp mode changeover
(See page 26.)
Airflow Direction
Quick Cool/Heat On/Off
● Press
Ventilation
Timer setting
Timer setting
Service Contact/Model info
Return
Setting
screen.
Press Menu/Enter button to display
Timer setting
2/2
Schedule timer
Disable
the timer settings screen.
Off reminder timer
Disable
* Items presently enabled or disabled are
displayed.
Return
Setting
●
Press Operation Mode Selector button
several times until the desired mode
Cooling, Heating, Fan, or Auto mode is
°C
selected.
*
Unavailable operation modes are not displayed.
*
Only the Cooling or Fan mode can be selected if the air
conditioner is a cooling-only model.
*
The Auto mode can be set in the case of the VRV cooling/
heating simultaneous operation system.
*
Changeover under control will appear on each remote controller,
but only the Cooling or Fan mode can be set in the case of the
VRV cooling-only system.
Note
●
Before making a mode change, make sure that Changeover
under control is not displayed on the remote controller.
The cooling or heating mode cannot be selected if the above is
displayed on the remote controller. See page 21 if Changeover
under control display blinks.
(Use of Direct Buttons)
(SkyAir and VRV)
buttons to select
on the main menu
Operation button
display
Displays the positions of
buttons to be operated.
English