Basic Operation Method
Operation Selection
3
Cool
Set temperature
28
Return
Setting
Cool/Heat Selection Eligibility
●
The "Cool", "Heat", "Auto" can be set for only the remote controller for which the cooling/heating
selection eligibility is set.
(The display "Auto" will appear for the heating/cooling simultaneous operation system only.)
The remote controller with
the selection eligibility
1.
(without "
(Changeover under
control) displayed)
The remote controller with
the selection eligibility
2.
(without "
(Changeover under
control) displayed)
22
●
Press the remote controller that has the
cooling/heating selection eligibility (or
the remote controller without the display
°C
"
" (Changeover under control))
several times until the desired mode is
selected. The display will change to
"Fan", "Dry", "Auto", "Cool", "Heat" each
time the button is pressed.
●
The display "Auto" will appear for the
heating/cooling simultaneous operation
system only.
At that time, the other remote controllers
with no selection right will follow suit and
change the display automatically.
Set to "Cool", "Heat",
"Dry", "Auto" mode.
"
Set to "Fan" mode.
"
(Use of Direct Buttons)
Other remote controllers
(with "
"
(Changeover under
control) displayed)
●
The system will go into the mode set in
the remote controller. No other modes
are available.
●
The system, however, can be switched
to fan mode or from "Cool" to "Dry".
Other remote controllers
(with "
"
(Changeover under
control) displayed)
●
The system cannot be set to other
modes except fan mode.
English