Operation Contents
Program Dry
The Program dry function of the system repeats the weak cooling
operation of the system intermittently to dehumidify the room without
dropping the room temperature as much as possible for the
prevention of excessive cooling.
Program Dry Operation
●
The microcomputer is in automatic temperature and fan speed control. Therefore, temperature or
fan speed settings cannot be made or changed while the air conditioner is in operation.
Home Leave
Home Leave is a feature that enables to keep the room temperature above 10°C when the
occupants are out.
Note
●
This function will switch on heating if the installation is switched off.
Operation Method
1
Cool
Set temperature
28
Return
Setting
Cool
Set temperature
28
Return
Setting
English
The home leave can not be enabled when a centralized control is connected.
●
Press and hold the "
for at least four seconds. (During
°C
backlight lit)
●
The Home Leave icon displays and
function is enabled.
The Home Leave icon shows the status
°C
of the home leave function.
ON
FLASHING
OFF
●
To cancel the home leave mode, continue
pressing "
four seconds. (During backlight lit)
" or "
Home leave is enabled
Home leave is active
Home leave is disabled
" or "
" button for at least
" button
19