Troubleshooting A Damaged System - Dell PowerEdge C6220 Hardware Owner's Manual

Hide thumbs Also See for PowerEdge C6220:
Table of Contents

Advertisement

5
Reinstall the components you removed in step 3.
6
Close the system. See "Closing the System" on page 219.
7
Reconnect the system to the electrical outlet, and turn on the system
and attached peripherals.
If the system does not start properly, see "Getting Help" on page 310.
8
If the system starts properly, shut down the system and reinstall the
expansion card that you removed. See "Installing the Expansion Card"
on page 157.
9
If the system fails to start, see "Getting Help" on page 310.

Troubleshooting a Damaged System

CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
1
Turn off the system and attached peripherals, and disconnect the
system from the electrical outlet.
2
Open the system. See "Opening the System" on page 218.
3
Ensure that the following components are properly installed:
Expansion-card assembly
Power supplies
Fans
Processors and heat sinks
Memory modules
Hard-drive carriers
4
Ensure that all cables are properly connected.
5
Close the system. See "Closing the System" on page 219.
6
If the system fails to start, see "Getting Help" on page 310.
Installing System Components | 283

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents