System-Board Assembly; Removing A System-Board Blank Tray - Dell PowerEdge C6220 Hardware Owner's Manual

System-Board Assembly

Removing a System-Board Blank Tray

CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
1
Remove the screw that secures the retaining latch. See Figure 3-8.
2 Press the retaining latch and slide the system-board blank tray out of
the chassis. See Figure 3-8.
Figure 3-8. Removing and Installing a System-Board Blank Tray
1 retaining latch
3 system-board blank tray
2 screw
Installing System Components | 141