Dell PowerEdge C6220 Hardware Owner's Manual page 100

Token Setup option
Video
0088
Enumeration
Embedded USB
008C
Controller
Embedded USB
008D
Controller
Restore on AC
00A1
Power Loss
Restore on AC
00A2
Power Loss
Restore on AC
00A3
Power Loss
00BA Embedded NIC2 Disable the system's secondary embedded network
Embedded NIC2 Enable the system's secondary embedded network
00BB
Embedded NIC2 Enable the system's secondary embedded network
00BC
00BF Remote Access
Serial port
00C0
number
00C1 Power Button
00C2 Power Button
Hyper-Threadin
00D1
g Technology
Hyper-Threadin
00D2
g Technology
100 | Installing System Components
Description
The first add-in video controller is used for boot-time
messages. Depending on the BIOS search order and
system slot layout.
Causes the BIOS to enable the built-in USB controller at
system startup.
Causes the BIOS to disable the built-in USB controller at
system startup.
After an AC power loss, when AC power is restored, the
system will stay off.
After an AC power loss, when AC power is restored, the
system will return to the state was in when power was lost.
After an AC power loss, when AC power is restored, the
system will power on.
interface controller.
interface controller, but don't enable the NIC's associated
PXE or RPL boot-ROM.
interface controller (full-function), including its PXE
boot-ROM.
Serial Console Redirection Off.
Serial Console Redirection On, output to COM1. See also
token D7h.
Default, Enables Power Button to turn off system.
Disables Power Button to turn off system.
Enables Hyper-Threading Technology.
Disables Hyper-Threading Technology.