Impex MARCY DIAMOND MD-8870 Owner's Manual page 18

STEP 6 (See Diagram 6 & Cable Loop Diagram)
A.) Attach one end of 79" Butterfly Cable (#63) to the clip on Left Butterfly (#11). Draw the Cable to
the left Swivel Pulley Bracket (#14).
B.) Attach a Pulley (#39) to the Bracket. Secure it with one M10 x 2" Allen Bolt (#75), two Ø ¾"
Washers (#81), two Cable Retainers (#59), and one M10 Aircraft Nut (#83).
C.) Draw the Cable around the Pulley then downward. Attach a Single Floating Pulley Bracket (#24) to
the Cable. Repeat Procedure B above to install a Pulley.
D.) Draw the Cable around the Pulley then upward to the right Swivel Pulley Bracket. Let the Bracket
hanging for now.
E.) Repeat Procedure B above to install a Pulley.
F.) Draw the Cable around the Pulley then clip to the Right Butterfly (#12).
17