Impex MARCY DIAMOND MD-8870 Owner's Manual page 11

STEP 3 (See Diagram 3)
A.) Do not tighten all Nuts and Bolts until instructed to so.
B.) Attach the Rear Base Frame (#7) to the Rear Right & Left Vertical Frame (#2 & #3).
C.) Secure each end with four M10 x ¾" Allen Bolts (#72) and four Ø ¾" Washers (#81).
D.) Attach the Middle Vertical Frame (#8) onto the Rear Base Frame. Attach the Foot Plate
(#35) to front Middle Vertical Frame. Attach the Lower Pulley Frame (#15) to the Middle
Vertical Frame from rear. Secure them together with two M10 x 3 1/8" Carriage Bolts
(#69), two Ø ¾" Washers (#81), and two M10 Aircraft Nuts (#83).
E.) Attach the Rear Upper Frame (#5) to the Middle Vertical Frame; Rear Left Vertical Frame,
and Rear Right Vertical Frame.
F.) Repeat C to secure the Rear Upper Frame to Rear Left and Right Vertical Frame.
G.) Attach the Lat Bar Frame (#17) onto the Rear Upper Frame. Secure the Lat Bar Frame;
Rear Upper Frame, and the Middle Vertical Frame together with two M10 x 3 ½" Carriage
Bolts (#68), two Ø ¾" Washers (#81), and two M10 Aircraft Nuts (#83).
H.) Attach the Chin-up Bar (#25) to the Left & Right Chin-up Bracket (#26 & #27). Secure
each end with two M10 x 1 5/8" Carriage Bolts (#66), two Ø ¾" Washers (#81), and two
M10 Aircraft Nuts (#83).
10