Impex MARCY DIAMOND MD-8870 Owner's Manual page 16

STEP 5 (See Diagram 5 & Cable Loop Diagram)
A.) Attach the 122" Cable (#62) to the bracket under the Lat Bar Frame (#17). Attach a Pulley (#39) to
the bracket. Secure it with one M10 x 1 ¾" Allen Bolt (#76), two Ø ¾" Washers (#81), and one
M10 Aircraft Nut (#83). Make sure the ball stopper one Cable needs to be under the bracket.
B.) Draw the Cable over the Pulley to the open bracket under the Lat Bar Frame.
C.) Attach a Pulley to the bracket. Secure it with one M10 x 2" Allen Bolt (#75), two Ø ¾" Washers
(#81), two Cable Retainers (#59), and one M10 Aircraft Nut (#83).
D.) Draw the Cable over the Pulley and downward. Attach a Pulley to the top hole on the two Double
Floating Pulley Brackets (#23). Repeat C to install the Pulley. Draw the Cable around the Pulley
and upward to the opening on the Weight Glide Post (#16). Let the Brackets hanging for now.
E.) Attach a Pulley to the opening on the Weight Slide Post (#16). Secure it with one M10 x 2 3/8"
Allen Bolt (#74), two Ø 1" x ½" Pulley Bushings (#37), and one M10 Aircraft Nut (#83).
F.) Draw the Cable around the Pulley and downward to triangular bracket on the Sliding Weight Post
(#22). Secure the end of Cable to the bracket with one M10 x 1" Allen Bolt (#73), two Ø ¾"
Washers (#81), and one M10 Aircraft Nut (#83).
G.) Connect the Lat Bar (#33) to the Cable with two Hooks (#54) and one 10-link Chain (#53).
15