"Bin Full" Detection System - Follett HMF1000R Operation And Service Manual

"Bin full" detection system

The Follett Horizon ice machine incorporates a unique "bin full" detection system, that consists of the shuttle and
actuator. The shuttle incorporates a fl ag and sensor. Referencing the fi gure below, the normal running position of
the fl ag is down, out of the sensor. When the bin fi lls to the top and ice can no longer move through the tube, the
machine will force the shuttle fl ag up into the sensor, shutting the machine off. The shuttle actuator, located above
the ice bin allows the ice to curl up within it when the bin is full to contain any forces. In this way, there are no loads
generated that would tend to lift off the lid of the bin.
Shuttle fl ag and sensor
Running
Off
Shuttle actuator
Running
Off
26 Horizon 1000R/N Ice Machines