Table of Contents
Advertisement
"Bin full" detection system
The Follett Horizon ice machine incorporates a unique "bin full" detection system that consists of the shuttle
and actuator. The shuttle incorporates a flag and switch. Referencing the figure below, the normal running
position of the flag is down, and the switch is closed. When the bin fills to the top and ice can no longer move
through the tube, the machine will force the shuttle flag up, opening the switch and shutting the machine off.
The shuttle actuator, located above the ice bin allows the ice to curl up within it when the bin is full. In this way,
there are no loads generated that would tend to lift off the lid of the bin.
Shuttle flag and sensor
Shuttle actuator
Running
Running
28
Off
Off
Advertisement
Table of Contents
