Service Information ......................... 9 Warranty ..........................10 Nady wireless systems are type accepted under FCC rules parts 90, 74 and 15. This device complies with RSS-210 of Industry & Science Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
VHF or UHF wireless systems on the same stage. The EO3 system has a wireless operating range of 300 feet, which allows it to be used with confidence in venues from small clubs to large theatres.
If a preamp is used, be sure to have a setting up the Transmitter blocking capacitor (1 mfd) between the preamp output and the EO3 mic input. If a dynamic mic Your EO3 requires minimum installation. is plugged into the mic input by mistake, there...
More Than One eO3 system clockwise. This will increase audio level and cause “TX” to flash along with the You may operate up to three EO3 systems program source. When “TX” is flashing, in the same location. For example, you may the transmitter is broadcasting properly.
EO3 Receiver using the earbuds The EO3 receiver is a pocket sized wireless audio receiver with an output for earbuds Simply plug the included earbuds into the to provide in ear monitoring, and offers earphone jack (2) on top of the receiver.
Page 7
This is a normal occurrence whenever radio their hearing. Therefore, it is very important signals are transmitted inside a building. that the EO3 be used at a reasonable and If you step away from the “drop out” zone, comfortable listening level.
Power On LED, Audio Modulation “TX” LED antenna Permanently mounted telescoping whip Power requirement 9 VDC regulated, @ 200 mA, AC-EO3 adapter provided Dimensions 1.25” H, 8.25” W, 4.25” D (3.175 x 20.9 x 10.8 cm) weight 18.2 oz. (500 g.)
Include a brief description of the problem you are experiencing. For service of a unit under warranty, please follow the instructions in the following section. Outside the u.s. For service or warranty matters please contact the Nady distributor in your country through the dealer/store from which you purchased this product.
2) Send the unit back to Nady Systems, 6701 Shellmound Street, Emeryville, CA, 94608, freight pre-paid. You must include proof of date and place of purchase (i.e., photocopy of your bill of sale) or Nady cannot be responsible for repair or replacement. Nady Systems, Inc. will not repair, nor be held responsible, for any units returned without proper identification, return address, and R/A number clearly marked on the package.
Page 12
6701 Shellmound Street | Emeryville, CA USA 94608 T 510.652.2411 | F 510.652.5075 | www.nady.com...
Need help?
Do you have a question about the EO3 and is the answer not in the manual?
Questions and answers