Subscribe to Our Youtube Channel
Related Manuals for Nady Systems IRW-220X HT/LT/O - Nady Ir Wireless System
Summary of Contents for Nady Systems IRW-220X HT/LT/O - Nady Ir Wireless System
- Page 1 IRW-220X INFRARED WIRELESS MICROPHONE SYSTEM NADY SYSTEMS, INC. O W N E R S M A N U A L 6701 Shellmound Street • Emeryville, CA 94608 USA Tel: 510 / 652-2411 • Fax: 510 / 652-5075 www.nady.com...
-
Page 2: Table Of Contents
CONTENTS SPECIFICATIONS IRW-220X Receiver CO NTENTS ..................2 Mode ......................Infrared Frequency Modulated Receiving channels ....................Dual channels A & B INTRODUCTIO N ................3 Carrier frequency ..................(Ch A) 2.0MH; (Ch B) 2.6MH Audio frequency response ....................60Hz~12KHz USING THIS MANUAL ............... 3 S / N ratio ............................. -
Page 3: Introduction
IRW-LT6X BODYPACK TRANSMITTER INTRODUCTION Thank you for purchasing the NADY IRW-220X infrared wireless microphone system and congratulations on your choice. The IRW-220X is loaded with top professional operating b. Adjust the IRW-LT6X Volume Control(6) to minimum and slide the Power features and is the best performance and price value available in infrared wireless systems. -
Page 4: System Features
SYSTEM FEATURES IRW-LT6X BODYPACK TRANSMITTER IRW-220X DUAL-IR WIRELESS MICROPHONE RECEIVER • Dual receiver allows 2 channel simultaneous operation of 2 transmitters (Ch A, Ch B) • IR signal reception LED indicators • Channel A / B mix audio output RCA phono jack •... -
Page 5: Irw-220X Receiver
IRW-HT6X HANDHELD MICROPHONE TRANSMITTER IRW-220X RECEIVER FRO NT (1) Power Switch (2) Channel A & B IR LED Indicator (1) Battery Compartment / Cover (2) Power Switch (3) Power LED Indicator 1. Transmitter Set-up BACK Unscrew and remove the Battery Compartment Cover (1) by sliding it down off the (3) Power Cord microphone to expose the battery holders. -
Page 6: Irw-1S Infrared Sensors
IRW-1S INFRARED (IR) SENSORS IRW-1S INFRARED (IR) SENSORS (1) IR Receptor (2) Power LED (3) Wall Mounts 1. Operation b. Since the unit utilizes infrared light reflected off of room surfaces, do not mount the The IR Sensors act as “antenna” for your infrared wireless microphone system. A multiple sensors near a black ceiling, wall, or heavy curtains as they may limit the range by array of wide angle IR-sensitive LED’s, behind the front panel receptors, receives the eliminating such reflection.
Need help?
Do you have a question about the IRW-220X HT/LT/O - Nady Ir Wireless System and is the answer not in the manual?
Questions and answers