Albatron K8X250GB PRO Manual page 14

Power Source Selection Headers for USB: JUSBV1/JUSBV3
JUSBV1/JUSBV3
3
+5V
1
Pin 1-2 close
3
+5V standby
Voltage
1
Pin 2-3 close
Note:
In order to support this function "Power-on system via USB device,"
"JUSBV1/JUSBV3" jumper cap should be placed on Pin 2-3 individually.
Power Source Selection Headers for Keyboard/Mouse: JKBMSV1
JKBMSV1
3
1
Pin 1-2 close
3
1
Pin 2-3 close
Note:
In order to support this function "Power-on system via keyboard and
mouse", "JKBMSV1" jumper cap should be placed on Pin 2-3.
Front Panel Audio Out Header: JAUDIO1
This connector will allow user to connect with the front audio out put
headers on the PC case. It will disable the output on back panel audio
connectors.
2
Pin Assignment
1 Mic in/center
3 Mic power/Bass
Right line out/Speaker out
5
Right
7 Reserved
9 Left line out/Speaker out Left
Right line in/Rear speaker
11
Right
13 Left line in/Rear speaker Left
Assignment
JUSBV1: +5V for USB at the USB1
and JUSBLAN1 connector
ports.
JUSBV3: +5V for USB at the JUSB
1~2 connector ports.
JUSBV1: USB1 and JUSBLAN1
ports powered with standby
voltage of +5V
JUSBV3: JUSB1~2 ports powered
with standby voltage of +5V
Assignment
+5V +5V for keyboard and mouse
PS/2 mouse and PS/2 keyboard
+5V Standby
are powered with +5V standby
Voltage
voltage.
14
1 13
JAUDIO1
Pin
2 Ground
4 Audio power
6 Right line out/Speaker out Right
8 Key
10 Left line out/Speaker out Left
12 Right line in/Rear speaker Right
14 Left line in/Rear speaker Left
12
K 8 X 2 5 0 G B
K 8 X 2 5 0 G B
Description
Description
Assignment
P R O
P R O