Mailing Service; Event Setting - Samsung SHR-6080 User Manual

using the DVR

Mailing Service

You can send an e-mail to a DVR-registered user at a specifi c time interval, or if an event occurs.
SMTP Setting
Sets the SMTP mail server.
Using the mouse may help easy setup.
3. In the <Network> setting window, press the up/down
(▲▼) button to move to <Mailing Service> and press the
[ENTER] button.
4. Select <SMTP>.
You will see the SMTP setting window.
Use direction buttons (▲▼◄ ►) to move to a desired item
5.
and set the value.
•
Server Type : Displays the connected server type.
•
Server : Enter a server to connect to.
•
Port : Sets the communication port.
•
Use Authentication : Check this if the SMTP server uses user authentication.
The account input box will be activated.
•
User : Enter a user to use authentication when connecting to the SMTP server.
•
Password : Enter the password of the SMTP server user.
•
Secure Transfer : Select one from <Never> and <TLS (if available)>.
•
Sender : Use the virtual keyboard to enter the sender's e-mail address.

Refer to "Using Virtual Keyboard". (Page 36)
•
Test : Conducts the test on the server settings.
6. When the SMTP setting is done, press <OK>.

Event Setting

You can set the interval and type of the event that will be sent to the user.
Using the mouse may help easy setup.
3. In the <Network> setting window, press the up/down
(▲▼) button to move to <Mailing Service> and press the
[ENTER] button.
4. Select <Event>.
Use direction buttons (▲▼◄ ►) to move to a desired item
5.
and set the value.
•
Event Interval : Set the event interval.

If a series of events occurs, the e-mail will be sent at the specifi ed
interval, not on each event.
•
Use Event Transfer : Select an event type to send if an event occurs.
If the selected event occurs, the e-mail will be sent to the group that has the recipient authority.
6. When the event setting is done, press <OK>.
62_ using the DVR
Mailing Service
SMTP
Event Group
ServerType SMTP mail Server
Server
Port 25
Use Authentication
User
Password
********
Secure Transfer Never
Sender
TEST
OK Cancel
Mailing Service
Event
SMTP Group
Event Interval 10 min
Use Event Transfer
Sensor Motion
Change P/W HDD Info
Power On/Off Manual Record
OK Cancel
Recipient
ex. user@example.net
Recipient
Video Loss