Mailing Service - Samsung SDS-V4040 User Manual

mailing Service

You can send an e-mail to a DVR-registered user at a specific time interval, or if an event occurs.
If an event occurs with a channel where the camera's video is set to <OFF> or the remaining recording count is set
`
M
to <OFF>, only the text notification will be sent to the applicable email address.
The e-mail receivers are not able to adjust the attached image quality.
`
SmTP Setting
Sets the SMTP mail server.
Using the mouse may help make setup easier.
1. In the <network> setting window, press the up/down
($%) button to move to <mailing Service> and press the
[enTeR] button.
2. Select <SmTP>.
You will see the SMTP setting window.
3. Use direction buttons ($%_ +) to move to a desired item
and set the value.
• ServerType : Displays the connected server type.
• Server : Enter a server to connect to.
• Port : Sets the communication port.
• Use Authentication : Check this if the SMTP server uses user authentication.
The account input box will be activated.
• User : Enter a user to use authentication when connecting to the SMTP server.
• Password : Enter the password of the SMTP server user.
• Secure Transfer : Select one from <never> and <TLS (if available)>.
• Sender : Use the virtual keyboard to enter the sender's e-mail address.
Refer to "Using Virtual Keyboard". (Page 37)
`
• TEST : Conducts the test on the server settings.
4. When the SMTP setting is done, press <OK>.
Mailing Service
SMTP
Event Group
 ServerType SMTP mail Server
 Server
 Port 25
Use Authentication
User
Password
 Secure Transfer Never
 Sender ex. user@example.net
TEST
OK Cancel
Recipient
English _71