Samsung SHR-6080 User Manual page 46

using the DVR
Remote Devices
You can set the RS-485 communication for use of PTZ Camera and system keyboard with the DVR.
Using the mouse may help easy setup.
3. Use the up/down buttons (▲▼) in <Device> window to
move to <Remote Device>, and press [ENTER] button.
Use direction buttons (▲▼◄ ►) to move to the desired
4.
item, and press [ENTER] button.
5. Set the values of each communication setup of the remote
device.
•
Baud rate : Baud rate settings of the DVR, PTZ camera and
system keyboard should be matched for proper operations.
6. Make sure to match IDs of the DVR, System Keyboard
and Remote Control, and press <OK>.
M

For changing the remote control's ID, refer to "Changing the Remote Control ID". (Page 13)
POS Devices
You can set properties of POS devices connected to the DVR.
A POS device connection requires channel, preset, and port/Ethernet settings.
Using the mouse may help easy setup.
3. Use the up/down buttons (▲▼) in <Device> window to
move to <POS Device>, and press [ENTER] button.
Use direction buttons (▲▼◄ ►) to move to a desired
4.
item, and set the value.
•
POS USE : When selected <POS USE>, DVR and POS will
be connected.
J 
If you change settings for the device and press <OK> while
the <POS USE> is not checked, the changes for POS device
will not be saved.
•
POS Device Setup : Sets the communication setups for the
POS device and DVR.

It is independent to the Remote Device setup.
46_ using the DVR
Remote Device
Baudrate Parity Data Stop bit
9600 None 8 1
System Keyboard OFF ID 00
Remote Control ON ID 00
OK Cancel
POS Device
POS USE
POS CH Preset
1 None No preset
2 None No preset
3 None No preset
4 None No preset
5 None No preset
6 None No preset
7 None No preset
8 None No preset
OK Cancel
POS Device
POS USE
POS CH Preset
1 None No preset
POS Device Setup
2 None No preset
3 None No preset
Baudrate Parity Data Stop bit
4 None No preset
9600 None 8 1
5 None No preset
6 None No preset
OK Cancel
7 None No preset
8 None No preset
OK Cancel
Transfer type
Half Duplex
POS Device Setup
Port/Ethernet
None
None
None
None
None
None
None
None
Previous/Next Page
POS Device Setup
Port/Ethernet
None
None
None
Transfer type
None
Half Duplex
None
None
None
None
Previous/Next Page