Mailing Service; Event Setting - Samsung SRD-830 User Manual

using the DVR

mailing Service

You can send an e-mail to a DVR-registered user at a specific time interval, or if an event occurs.
M `
If an event occurs with a channel where the camera's video is set to <OFF> or the remaining recording count is set
to <OFF>, only the text notification will be sent to the applicable email address.
Smtp Setting
Sets the SMTP mail server.
Using the mouse may help easy setup.
3. In the <network> setting window, press the up/down
(▲▼) button to move to <mailing service> and press the
[enter] button.
4. Select <smtp>.
You will see the SMTP setting window.
5. Use direction buttons (▲▼_ +) to move to a desired item
and set the value.
~ ServerType : Displays the connected server type.
Server : Enter a server to connect to.
~
Port : Sets the communication port.
~
Use Authentication : Check this if the SMTP server uses user authentication.
~
The account input box will be activated.
User : Enter a user to use authentication when connecting to the SMTP server.
~
Password : Enter the password of the SMTP server user.
~
Secure Transfer : Select one from <never> and <tLs (if available)>.
~
~ Sender : Use the virtual keyboard to enter the sender's e-mail address.
`
Refer to "Using Virtual Keyboard". (Page 38)
~ TEST : Conducts the test on the server settings.
6. When the SMTP setting is done, press <oK>.

event Setting

You can set the interval and type of the event that will be sent to the user.
Using the mouse may help easy setup.
3. In the <network> setting window, press the up/down
(▲▼) button to move to <mailing service> and press the
[enter] button.
4. Select <event>.
5. Use direction buttons (▲▼_ +) to move to a desired item
and set the value.
Event Interval : Set the event interval.
~
`
If a series of events occurs, the e-mail will be sent at the specified
interval, not on each event.
Use Event Transfer : Select an event type to send if an event occurs.
~
If the selected event occurs, the e-mail will be sent to the group that has the recipient authority.
6. When the event setting is done, press <oK>.
66_ using the DVR
Mailing Service
SMTP
Event Group
 ServerType
SMTP mail Server
 Server
 Port
25
Use Authentication
 User
 Password
********
 Secure Transfer
Never
 Sender
TEST
OK Cancel
Mailing Service
Event
SMTP Group
 Event Interval
10 min
Use Event Transfer
Sensor Motion
Change P/W HDD Info
Power On/Off Manual Record
OK Cancel
Recipient
ex. user@example.net
Recipient
Video Loss