Mailing Service - Samsung SDH-C74040 User Manual

Mailing Service

You can send an e-mail to a DVR-registered user at a specific time interval, or if an event occurs.
If an event occurs with a channel where the camera's video is set to <OFF> or the remaining recording count is set
M
to <OFF>, only the text notification will be sent to the applicable email address.
If you set the interval of the e-mail notice too short, the e-mail server may consider it as spam that will not be
J
transferred normally.
SMTP Setting
Sets the SMTP mail server.
Using the mouse may help make setup easier.
1. Use the up/down buttons ( ) in <Network> window to
move to <Mailing Service>, and press [ENTER] button.
2. Select <SMTP>.
You will see the SMTP setting window.
3. Use direction buttons ( ◄ ►) to move to a desired
item, and set the value.
• ServerType : Displays the connected server type.
• Server Address : Enter a server to connect to.
• Port : Sets the communication port.
• Use Authentication : Check this if the SMTP server uses
user authentication.
The account input box will be activated.
• ID : Enter a user to use authentication when connecting to the SMTP server.
• Password : Enter the password of the SMTP server user.
• Secure Transfer : Select one from <Never> and <TLS (if available)>.
• Sender Address : Use the virtual keyboard to enter the sender's e-mail address.
Refer to "Using Virtual Keyboard". (Page 36)
• E-mail Test : Conducts the test on the server settings.
4. When the SMTP setup is done, press <OK>.
Mailing Service
SMTP
Event Group
ServerType SMTP mail Server
Server Address
Port 25
Use Authentication
ID
Password
Secure Transfer Never
Sender Address ex. user@example.net
E-mail Test
OK Cancel
Recipient
English _71