This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at Thank you for purchasing a Samsung product. the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal,...
Page 2
key features of your DVR Your purchased digital video recorder (DVR) compresses a 4-channel camera input into an MPEG4 video; also, it provides the functions that record to the HDD in real-time and play the content by compressing the 4-channel audio input with ADPCM. Also through the network, it transmits video and audio to an external device in real-time and allows monitoring the video and audio through a PC from a remote location.
safety regulations Please be sure to keep the following in mind for the right use of the product to prevent proprietary risk or damage. Do not use multiple plugs at once. This may cause abnormal heat generation or fire ...
You may download open source codes from the following website: http://www.samsung.com. Before installing any external device such as external memory or HDD, please check the compatibility of the device with Samsung DVR. The list of the compatible devices with Samsung DVR can be obtained from your vendor.
contents INTRODUCING YOUR REAL TIME DVR Controls on the DVR Real panel jacks Remote control INSTALLATION Checking installation environment CONNECTING WITH OTHER DEVICES Connecting video, audio, and monitor Connecting the network Connecting the alarm input Connecting the alarm output Connecting the RS-485 device Connecting the USB LIVE Operating the system...
Page 6
SEARCH AND PLAY User login Search screen Search date & time selection Search channel selection & recording graph Playback Net I APPENDIX Resource Recording Event Network System SFX player WebDVR Pop-up menu Specifications Outline drawings Troubleshootings(FAQ) Open source license report on the product 02_ contents SHR-5042_Eng.indb 2007-06-08...
introducing your real time DVR CONTROLS ON THE DVR introducing your real time DVR_03 SHR-5042_Eng.indb 2007-06-08 ソタネト 1:23:48...
Page 8
Name Function User authentication will be requested if the power button is pressed when Button you try to terminate the system operation. It is used when you turn on/off the DVR system power. This is the port used for connecting a USB type of device. USB Port It is used when you upgrade the system software.
Page 9
Name Function If an event (like a motion or alarm) occurs, the ALARM LED is lighted on. This LED indicates whether the HDD is normally accessed. When accessing the HDD, this LED repeatedly blinks. This LED indicates the status of network connection and data transmission. This LED indicates the status of backup operation.
Page 10
Name Function Display the 4-split screens. Display the Picture in Picture (PIP) screen. Button Screen Switchover: It will be switched over to the single channel screen according to the time set from the system setup. Display the 4-split screens. Button Display the 9-split screens.
REAL PANEL JACKS This is the port (RCA Jack) for an audio signal output. AUDIO OUT (When outputting an audio signal, please use the speaker with a built-in audio amplifier.) ALARM IN 1~4: This is the port for an alarm input. ALARM ALARM OUT 1~2: This is the port for an alarm output.
Figure 2 Please keep the following instructions for rack-mounting the Samsung DVRs to proceed with the installation. 1. The rack on which the DVR is mounted should not Temperature One Year: 24HR X 365 DAY =8,760 HR Unit: ºC...
connecting with other devices CONNECTING VIDEO, AUDIO, AND MONITOR Audio input Audio output Video in Video through out Since it may have a risk of an electric shock on the video cable connected to the camera according to the grounding state of the power cable, please connect the video cable when the system power is turned off.
CONNECTING THE NETWORK Connecting to Internet through Ethernet (10/100BaseT) RJ45 Ethernet Cable (Direct Cable) INTERNET Back Bone Hub/Switcher Hub/Switcher Windows Smart Viewer Connecting to Internet through ADSL RJ45 Ethernet Cable (Direct Cable) ADSL MODEM INTERNET Phone(ADSL) Line Hub/Switcher Windows Smart Viewer 12_ connecting with other devices SHR-5042_Eng.indb 2007-06-08...
CONNECTING THE ALARM INPUT Connect one wire of the signal cable (2 wires) of various sensors (such as IR sensor, hot-wire detector and magnetic sensor) to the GROUND port and connect the remaining signal wire to the desired ALARM input port number. ...
CONNECTING THE ALARM OUTPUT Such as siren-lamp, amplified siren and external relay External Power Connect one wire of the signal cable (2 wires) of an external device (such as siren-lamp, amplified siren and external relay) to the GROUND port and connect the remaining signal wire to the desired ALARM output port number. 14_ connecting with other devices SHR-5042_Eng.indb 2007-06-08...
OPERATING THE SYSTEM LIVE SCREEN MODE Turn on the power and the following Samsung logo appears. Live screen icons The live screen icon indicates the setup and function status of each screen. Perform the initialization job to operate the system after the logo screen has appeared.
Page 21
Live screen modes Icon It indicates that the record lock is activated. After taking 4 live video inputs, images are displayed in This icon appears when you are recording video images the following 3 modes. while the record lock is set. To cancel the recording, enter the preset password.
Selecting live screen mode Audio On/Off setting in 4-split mode Each mode can be selected by using the button buttons. If you press the ) button in the 4 split mode, The following figure shows the diagram of changing the selection cursor appears as shown in the figure modes.
Zoom function When events occur from the channels 1 and 3 within 5 seconds after an event has occurred in the channel 2 (as shown in the figure). Then, the channels 1, 2 and 3 are The Zoom function doubles the size of the selected area switched to the full screen.
The details of the system menu are as follows: Inputting characters is enabled by ( ) or ( For entering a character, move the cursor on a desired SHR-5042/5040 MENU character key and press the ) button. System ►...
Page 25
Time/Date/Language Setup DST sets the clock one hour ahead the local standard time. This setting enables the system to display the time adjusted for DST. If the date set for DST comes, Date/Time/Language Setup the system time runs one hour faster. Time Setup 2007-04-03 05:12:46...
Page 26
User Add/Del Group Authority User Manager - User Manager - User Add/Del Group Authority Group User ID Group 1 Group 2 Group 3 Group1 user1 Menu User ID user1 Group1 user2 Password **** System Camera Monitoring Normal Record Group1 user3 Group Group 1 Event Record...
System Log The “ ” item allows granting the search right. System Log Profile 04-02 06:08:09 C3 C REC Stop 04-02 06:08:09 C3 M REC Start C3 System Failure 04-02 06:08:47 C2 M REC Stop Search 04-02 06:08:47 C1 M REC Stop Profile Network 04-02 06:08:50 C4 M REC Stop...
Page 28
Displays the recording information according to the Displays the time information between the entry and recording event and schedule. exit of the search mode. Displays the system start/stop, system access user Displays the time and IP address for the connected and setup change information.
Page 29
Log Type Log Details Description Search SEARCH IN/OUT Login/Logout with the Search Mode NETWORK CONNECTED Remote Software Connection NETWORK DISCONNECTED Disconnecting the Remote Software Connection BACKUP AVI-OK/FAILED AVI Backup Success/Failure BACKUP SDB-OK/FAILED SDB Backup Success/Failure BACKUP SFX-OK/FAILED SFX Backup Success/Failure BAKCUP BMP-OK/FAILED BMP Backup Success/Failure Network...
System Information & Setup For the DVR to recognize the update file the file should be inserted into a folder Caution named “update”. So this folder should be created on a USB memory and then System Information/Setup the upgrade file copied inside the folder. 00:C:8C:FF:00:A9 Mac Address ...
The details of the camera menu are as follows: Checking HDD Data Please, pay attention to Following Caution information to minimize the chance of SHR-5042/5040 MENU losing HDD data. System ► Remember that you should protect HDD Camera ►...
The camera name of the selected channel can be set. Manufacturer Model A virtual keyboard appears if you press the SAMSUNG Samsung PTZ Camera button. Characters can be input one by moving the cursor. You TECHWIN SPD-1600, SPD-3300 can input up to 10 characters. If you press “...
When it is Off, the camera name will not be displayed on the screen. : When it is On, the Audio/PTZ will be displayed SHR-5042/5040 MENU on the screen. When it is Off, the Audio/PTZ will not be System ►...
Page 34
Spot Mode The 1-channel DVR is supported. If the 1-channel support is set to On, it becomes the 1-channel DVR; and if the 1-channel support is set to Off, it becomes Spot Out the 4-channel DVR. If the 1-channel support is On, the Monitoring Type Event Normal...
RECORD MODE EVENT RECORD The details of the record menu are as follows: The details of the event recording are as follows: Record Mode SHR-5042/5040 MENU Quality Frame System ► Standard Camera ► Standard Monitoring ► Standard Record Mode Standard Event Record ►...
Page 36
Sets the camera linked to the current Alarm In. The default value is set to the current Alarm In number. At least one link between Alarm In and camera has to be established. Multiple selections are possible. The following screen will appear if the Post-Event Section Time that an event has occurred button is pressed by moving the cursor from the...
Motion Detection Setup Video Loss Detection Setup Motion Detection Setup Video Loss Detection Setup Alarm-Out Duration None 10 SEC Alarm-Out None None 10 SEC Duration None 10 SEC All Camera None 10 SEC Sensitivity High Area Set Cancel Default Cancel Move/Control Select Exit...
RECORD SCHEDULE Setup Recording Type Recording Support Screen The details of the record schedule menu are as follows: Symbol No Recording NONE Continuous Recording Schedule Recording Motion Recording 02 04 06 08 10 12 14 16 18 20 22 24 Alarm In Recording C: Continuous Continuous &...
: This mode saves in the video format that can be played from the Windows Media Player. The details of the network menu are as follows: Sets the date and time for backup. SHR-5042/5040 MENU Sets the storage device for backup. The backup System ► Camera ►...
Page 40
Sets the IP address for the main system to be DDNS Site DYNAMIC DDNS connected to the network. If the connection mode Host Name SAMSUNG is set to STATIC-IP, the user needs to enter the IP User ID address directly. Password...
Page 41
The DDNS site is selectable among SAMSUNG, DYNAMIC DDNS, NO IP and CHANGE IP. When SAMSUNG is selected, The IP will be registered NTP Setup to the DDNS being operated by Samsung Electronics. DYNAMIC DDNS, NO IP and CHANGE IP are the pool.ntp.org...
Page 42
NTP(Network Time Protocol) Server List Transfer Picture Setup Area NTP Server Address Worldwide pool.ntp.org Transfer Picture Setup Asia Asia.pool.ntp.org Quality Frame Bit Rate Europe Europe.pool.ntp.org Standard North America North-america.pool.ntp.org Standard Oceania Oceania.pool.ntp.org Standard Standard South America South-america.pool.ntp.org Video Size Austria at.pool.ntp.org Australia au.pool.ntp.org...
PTZ Device Press the button in the live mode to cancel the PTZ device control mode. Protocol Baudrate Samsung 9600 If it is cancelled, the PTZ icon( ) is changed from the PELCO-D SD 9600 yellow color to the white color.
Search( ) button is : This shows the state that can control the pressed. Pan, Tilt and Zoom function of the PTZ camera. PTZ MODEL Samsung PRESET SETUP Auto Setup Delete P/T SPEED...
“ ” again. CAMERA MENU SETUP If you press the ( ) button in the single screen PTZ device control mode, the PTZ menu setup window appears. PTZ MODEL Samsung Menu Setup Delete P/T SPEED ZOOM SPEED PRESET MODE SELECT...
recording REC(NORMAL RECORDING) The event recording function is performed only if the event recording function is set from the The recording will be made with the record mode setup recording schedule setup menu. If the job (such of the menu by pressing the button.
search and play USER LOGIN SEARCH DATE & TIME SELECTION Press the button in order to enter the search screen. You can move to the recorded date by using the calendar. If you press the ( ) icon to select the desired date for User Login search, the calendar window appears.
Page 48
SEARCH CHANNEL PLAYBACK SELECTION & RECORDING If you press “ ” after selecting the channel and date GRAPH to be searched, the video is played. Search Search 2007-03-26 14:08:03 02 04 06 08 10 12 14 16 18 20 22 24 CAM 01 CAM 02 CAM 03...
Page 49
If you press the left or right button( ) while the screen is paused, you can see still images forwardly or reversely. During reverse search, the interval between cuts may vary depending on the recording specification. You can turn On/Off the play channel audio by pressing button from the play screen.
Page 50
Logical View Tree, Physical View Tree, and System View Tree. area: When the address type is Samsung DDNS You can define the name, description, and the related settings of each entity, and see the settings. To manually register a device 1.
Page 51
When the address type is S1 DDNS When the configuration completes, the registered device is displayed on the physical view tree. If any registration problem occurs, it is displayed on the reply message box. The possible errors are like the following: Reply message Comments...
Page 52
It is set on the phygical view tree. You can see and Viewing the device-related settings modify the registered device. The device-related settings can be accessed by selecting after right-clicking on a device in the VIEW TREE area. The device-related settings that have been configured in each device site are displayed here.
Page 53
Using layouts area: You can directly execute several functions or applications. When listed from left to right, the tools are Connect/ Disconnect, Search Viewer, Setup Tool, Save Snapshot, Print Snapshot, Add a Bookmark, Remove the Selected Tile, Start Recording on All Tiles, Stop Recording on All Tiles, and Alarm Indicator.
For furthermore information, refer to Net I manual. Before use Setup menu buttons Net I Search Viewer By pressing buttons, you can select between each menu. The main categories : Resource, Recording, Event, Network, System Storage/Cancel of Changed Information : Close the windows and saves, any changed ...
Virtual Keyboard RESOURCE Camera You can set up brightness, contrast, hue, about each cameras. How you choose camera number select camera number in left side of server view. Click to operate Virtual Keyboard. Click buttons by mouse to input in information. Language Setting ...
Page 56
4. Name: RECORDING Input the name of site which camera is installed. 5. Brightness/Contrast/Hue : Recording setup Change the setting for the brightness, contrast, hue. Recording information (Recording Frame rate, Quality, Resolution, Event Record Frame rate) can be set up by 6.
Page 57
Recording Schedule EVENT This function allows you to setup a recording schedule for the DVR by each camera per hour. Motion Detection This Motion Detection uses connected with recording, alarm, emergency when motion is detected. 1. Schedule Timeline: You can set a variety of recording mode on time of each cameras.
Page 58
Alarm In 1. Obtain an IP Address Automatically (DHCP): Alarm In recognize emergency in outer area and use with Dynamic address assignment is a type of receiving recording, alarm, PTZ control. address from DHCP. DVR which receive address automatically from DHCP server set up network address in system.
Page 59
SYSTEM SFX PLAYER Date/Time You can set up date and time. Select Date/time set up SFX Player Execution and save current date and time by NTP server. This feature moves SFX backup files to the designated SFX storage folder after the system is connected to your PC.
Page 60
The domain network connection is available with DDNS setup on SHR-5040/5042 or register DDNS domain to Router. If you use SAMSUNG DDNS Service, domain and IP address, Subnet Mask, Gateway will be registered to DDNS server automatically. The automatic assigned domain displays as like 2.
Page 61
4. After install is complete, the screen below will be WebDVR Main Mode displayed. Insert ID and password to connect to DVR, and then click [LOGIN] . 1. [View panel] 5. If the correct log-in is used the WebDVR program This panel displays the live picture from the DVR.
Page 62
POP-UP MENU Pop-up Menu You can use this menu by pressing mouse-right button. Items shown on the pop-up menu are identical with buttons at system’s front panel. The benefit of this menu is that user can operate DVR system by simply using mouse. Names Features Search button...
Page 63
Names Features This button controls PTZ directions at PTZ mode. Direction button If user press Enter button, the pop-up menu will disappear. FREEZE button It executes Freeze feature at Live screen. : It performs a search in reverse direction quickly while playing Fast/Step the video.
Page 66
TROUBLESHOOTINGS(FAQ) PROBLEM SOLUTION Can’t turn ON the power of system Check if the computer’s power cables are all connected properly. Check the input voltage. If you can’t find any wrong connection, but you still can’t turn on the power, you have to consult service center or technisions.
Page 67
PROBLEM SOLUTION Some cameras show video images in weird Check the cameras connected to the system. Swich the camera color or in abnormal shape. that displays defected images with the other camera that displays images correctly, and then you can check which camera is not working properly or whether SHR-5040/5042 system is defected.
OPEN SOURCE LICENSE REPORT ON THE PRODUCT This product uses software provided under the name of GPL and LGPL. You can receive the following GPL and LGPL source codes by email request to www.sec.co.kr. GPL Software Kernel, Busybox, Sysvinit, dvd+rw-tools, cdrtools, dosfstools ...
Page 69
constitute a work based on the Program rights or contest your rights to work written (independent of having been made by running entirely by you; rather, the intent is to exercise the Program). Whether that is true depends on the right to control the distribution of derivative or collective works based on the Program.
Page 70
otherwise to copy, modify, sublicense or and a licensee cannot impose that choice. distribute the Program is void, and will This section is intended to make thoroughly clear automatically terminate your rights under this what is believed to be a consequence of the rest License.
Page 71
REPAIR OR CORRECTION. If the program is interactive, make it output a short notice like this when it starts in an 12. IN NO EVENT UNLESS REQUIRED BY interactive mode: APPLICABLE LAW OR AGREED TO IN WRITING Gnomovision version 69, Copyright (C) year WILL ANY COPYRIGHT HOLDER, OR ANY name of author Gnomovision comes with OTHER PARTY WHO MAY MODIFY AND/OR...
Page 72
and change free software to make sure the General Public License. We use this license for software is free for all its users. certain libraries in order to permit linking those libraries into non-free programs. This license, the Lesser General Public License, applies to some specially designated software When a program is linked with a library, packages--typically libraries--of the Free Software...
Page 73
a notice placed by the copyright holder or other be licensed at no charge to all third parties authorized party saying it may be distributed under the terms of this License. under the terms of this Lesser General Public d) If a facility in the modified Library refers to a License (also called “this License”).
Page 74
of the code of the Library into a program that is containing portions of the Library, and distribute not a library. that work under terms of your choice, provided that the terms permit modification of the work for 4. You may copy and distribute the Library (or the customer’s own use and reverse engineering a portion or derivative of it, under Section 2) in for debugging such modifications.
Page 75
executable. reason (not limited to patent issues), conditions are imposed on you (whether by court order, It may happen that this requirement contradicts agreement or otherwise) that contradict the the license restrictions of other proprietary conditions of this License, they do not excuse libraries that do not normally accompany the you from the conditions of this License.
Page 76
Foundation. be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can 14. If you wish to incorporate parts of the do so by permitting redistribution under these Library into other free programs whose terms (or, alternatively, under the terms of the distribution conditions are incompatible with...
OpenSSL LICENSE * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING * Copyright (c) 1998-2006 The OpenSSL Project. NEGLIGENCE OR OTHERWISE) All rights reserved. * ARISING IN ANY WAY OUT OF THE USE OF * Redistribution and use in source and binary THIS SOFTWARE, EVEN IF ADVISED forms, with or without...
Page 78
“This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)” The word ‘cryptographic’ can be left out if the rouines from the library being used are not cryptographic related :-). * 4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement:...