Samsung SHR-6080 User Manual page 39

•
1. Connect a device storing the software to be updated.
(It may take about 10 seconds to recognize the device.)

Upgradeable devices include USB memory, CD/DVD and
network device.

To update the network, the current DVR should have been
connected to the network.
Upgrade via the proxy server may not be enabled due to the
restricted access.
2. Select <System Management> from <System> window.
3. Select <System Information>.
4. When the recognized device appears, select <Upgrade>.

The <Upgrade> button will be activated only if the current <Software version> of the <System information> is same
to or older than that of <S/W Upgrade>.
5. Press <OK> in the "System Upgrade" window.

While updating, it shows the progress.
•
Updating progresses with 3 steps as shown in the fi gure.
6. When the updating is done, it automatically restarts.
Do not turn the power off until it fi nishes restarting.
M

If "Upgrade Failed" appears, retry from the step 4.
When you experience continued failure, consult the service
center for assistance.
System Management
System Information
Settings
System Information
Software Version v1.03_090227182931
System Upgrade
Broadcast Format
NTSC
MAC Address 00:00:F0:54:FF:FF
Current Version v1.03_090227182931
New Version v1.03_090305365217
S/W Upgrade
Do you want to upgrade?
Device USB2FlashStorage Upgrade
OK Cancel
Version v0.02_080826225303
Previous
System Management
System Information
Settings
System Information
Software Version v1.03_090227182931
Broadcast Format NTSC
S/W Upgrade
MAC Address 00:00:F0:54:FF:FF
Software upgrading...
S/W Upgrade
Upgrade
Device USB2FlashStorage
Version v0.02_080826225303
Previous
System Management
System Information
Settings
System Information
Software Version v1.03_090227182931
Broadcast Format S/W Upgrade
S/W Upgrade NTSC
MAC Address 00:00:F0:54:FF:FF
Software upgrading...
Software upgrading...
S/W Upgrade
Do not turn off during the upgrade.
Device USB2FlashStorage Upgrade
Version v0.02_080826225303
Previous
English _39