ProForm 390 E User Manual page 11

10, Appty a generous amount 01 the included
grease to the axles on the Upright (2)
Orient the Left and Right Upper Body Arms (8,
9) as shown, and slide them onto the left and
rigllt sides o! Ihe Upright (2).
Attach each Upper Body Arm (8, 9) with an M8
x 20mrn Patch Screw (80) and an M8 Washer
(33),
10
11. Apply a small amount of grease to a Shoulder
Patch Boll (31)..
While a second person holds the front end of
the Right Pedal Arm (49) inside the bracket on
ll_e righ! Upper Body Leg (6), insed 1he
Shoulder Patch Bolt (31) through the right
Upper Body Leg and the Right Pedal Arm
Tigh!en the Shoulder Patch Bolt (31) inlo the
welded nut on the right Upper Body Leg (6).
Repeat this step to attach the Left Pedal Arm
(not shown) to the left Upper Body Leg (6).
Tighten the MB x 45ram Button Bolts (76).
1t
76
11