Setting The Clock - Kenmore 665.61612 Use & Care Manual

SETTING THE CLOCK
When your microwave oven is first plugged in, or
after a power failure, the display will flash ":". If a
time of day is not set, ":" will flash until you touch
any pad.
2. Enter the time of day.
Example for 12:00:
TOUCH YOU SEE
NOTES:
• If you touch in an invalid time and touch CLOCK,
3 tones will sound. Enter the correct time.
• If you touch OFF/CANCEL while setting the clock,
the display will show the last time of day set.
• To turn off the clock, touch CLOCK, Number pad
0, and CLOCK again, the set time will disappear
and ":" will show on the display.
1. Touch CLOCK.
TOUCH YOU SEE
I
2
0
0
3. Complete your entry.
TOUCH YOU SEE
OR
15