Table of Contents
Advertisement
9. Click Run.
After each stage of the operation is completed, the check-box for that
stage becomes colored green
When the operation is completed, all 4 check-boxes will be colored
green and the status bar message: Memory Verify Pass appears
Figure 16: Atmel – Flip Window (Operation Completed)
10. Close the " Atmel – Flip" window.
11. Disconnect the power on the VP-727A.
1 See also the blue progress indicator on the status bar
2 If an error message: " Not Finished" shows, click Run again
20
Flash Memory Upgrade
VP727A.hex
Figure 15: Atmel – Flip Window (Connected)
1
VP727A.hex
.
KRAMER: SIMPLE CREATIVE TECHNOLOGY
2
:
Advertisement
Table of Contents
Need help?
Do you have a question about the VP-727A and is the answer not in the manual?
Questions and answers