Table of Contents
Advertisement
Items and meanings:
Enable Virtual
Server (1):
Private IP (2):
Private Port (3):
Type (4):
Public Port (5):
Comment (6):
Add (7):
Reset (8):
Virtual Server
Table (9):
Delete
Selected (10):
Delete All (11):
Reset (12):
Click 'Apply' (13) to save the settings.
Check this box to enable virtual server,
and uncheck this box to disable virtual server.
Input the IP address of the computer or network
device which provides the network service.
Input the port number of the IP address
which provides Internet service.
Select the type of connection, TCP or UDP. If you're
not sure, select 'Both'.
Select the number of the public port which will be
redirected to the port number of the local IP address
defined above.
Enter any text to describe this mapping, up to 16
alphanumerical characters; e.g., "FTP Server".
Adds the mapping to virtual server table.
Remove all input values.
All existing virtual server mappings will be
displayed here.
Select a virtual server mapping by clicking the
'Select' box of the mapping, then click 'Delete
Selected' button to remove the mapping. If there's no
existing mapping, this button will be grayed out.
Delete all existing virtual server rules.
Unselect all mappings.
Advertisement
Table of Contents
