Table of Contents
Advertisement
Items and meanings:
Client PC
Description (a):
Client PC IP
address (b):
Client PC
Service (c):
Protocol (d):
Port Range (e):
Add (f):
If you want to remove all settings in this page, click 'Reset' button.
Enter any text to describe this IP
address, up to 16 alphanumerical characters.
Enter the starting IP address in the left
field and the end IP address in the right field to
define a range of IP addresses, or just input the IP
address in the left field to define a single IP address.
Please check all services you want to allow or
deny through this IP address. You can check
multiple services.
If the service you need is not listed above, you can
create a new service on your own. Select TCP or
UDP. If you're not sure, select 'Both'.
Enter the port range of the new service here. If you
want to specify port 80 to 90, Enter 80-90; if you
want to apply this rule on a single port, just input
the port number, like '80'.
Click 'Add' to save settings. You'll be redirected to
the previous menu and the rule you just set will
appear in the IP filtering table.
Advertisement
Table of Contents
