Table of Contents
Advertisement
IP Filtering
Table (11):
Add PC (12):
Delete
Selected (13):
Delete All (14):
Click 'Apply' (15) to save the settings.
Click 'Continue' to go back to the previous setup menu and to continue
with the router setup. Click 'Apply' to reboot the router so the settings
will take effect. Please wait for about 30 seconds while the router is
rebooting.
network devices will be rejected.
All existing IP addresses in the table are listed
here.
Click this button to add a new IP address to IP
filtering table. Up to 20 IP addresses can be added.
Refer to section 3-3-1-1 'Add PC' below.
If you want to delete a specific IP address entry,
check the 'select' box of the IP address you want to
delete, then click 'Delete Selected' button. (You can
select more than one IP address at the same time.)
If you want to delete all IP addresses listed here,
click the 'Delete All' button.
Advertisement
Table of Contents
