Table of Contents
Advertisement
Items and meanings:
Enable Port
Forwarding (1):
Private IP (2):
Type (3):
Port Range (4):
Comment (5):
Add (6):
Reset (7):
Port Forwarding
Table (8):
Delete
Selected (9):
Delete All (10):
Reset (11):
Check this box to enable port mapping,
and uncheck this box to disable port mapping.
Input the IP address of the computer on the local
network which provides Internet service.
Select the type of connection, TCP or UDP. The
value depends on the requirements of your
application or service. If you're not sure what to use,
select 'Both'.
Enter the starting port number in the left field, and
input the ending port number in the right field. If
you only want to redirect a single port number, just
enter the port number in the left field.
Enter any text to describe this mapping, up to 16
alphanumerical characters, e.g., "camera web
port".
Add the mapping to the port forwarding table.
Resets all values of the input form.
Shows all existing port forwarding rules (port
mappings).
Select a port forwarding mapping by clicking
the 'Select' box of the mapping, then click the
'Delete Selected' button to remove the mapping. If
there's no existing mapping, this button will be
grayed out.
Delete all existing port mappings.
Unselect all mappings.
Advertisement
Table of Contents
