Using Your Answering Machine (Telstra 2400A Only); Message Display On The Base Station - Telstra 2400 User Manual

Digital dect cordless telephone/digital dect cordless telephone with digital answering machine
Table of Contents

Advertisement

Using your answering machine
29
Note
Your Telstra 2400a can digitally record up to 18 minutes of messages,
Your answering
with each message lasting a maximum of 3 minutes. As well as recording
machine is designed
to answer calls after
incoming messages, you can record memos for other users.
16 rings when it is
switched off. This
You can operate your Telstra 2400a from:
is to enable you to
operate the remote
● the handset;
access functions
of your answering
● the base unit;
machine in the event
● remotely from most tone dialling telephones.
your answering
machine is switched
Your Telstra 2400a comes with two pre-recorded outgoing messages,
off.
Answer and Record or Answer Only, but if you wish you can record your
own.
You will need to set the day and time (if you have not already done so) so
that you will know when each message was received, see page 9.

Message display on the base station

The table below provides an explanation of what is shown on the base
station display.
DISPLAY
(Blank)
C-0 (flashing)
0-9
9 (flashing)
–– Alternating with 0-9
A (flashing)
F (flashing)
P (flashing)
(Telstra 2400a only)
DEFINITION
Power off.
Day/Time needs to be set.
Answer-on mode, 0-9 messages.
10-59 messages. Indicating more than 9
messages stored.
Power on, but set to answer off mode.
The display flashes between a dash and
the number of messages saved in the
memory.
Handset menu and Remote access in
progress
Memory full.
Delete some or all of your messages
Message paused.

Advertisement

Table of Contents
loading

This manual is also suitable for:

2400a

Table of Contents