Time And Date Settings; Set Time On Handset - Telstra 2400 User Manual

Getting started
3. Charge the handset for at least 16 hours by placing it on the base. The
red charging indicator light on the base comes on.
The screen will show the standby display and a scrolling battery icon
to show that the handset is charging.
4. After 16 hours, plug the telephone line cord into your Telstra
2400/2400a base unit and the other end into the wall socket.

Time and date settings

Set time on the handset
If you have subscribed to Telstra Calling Number Display feature
time will be set automatically when you receive your first call. You can
also set the time manually.
1. Press scroll
2. Press the button to confirm.
3. Scroll to SET TIME and press the
4. Enter the current time in 24 hour format using the keypad. E.g. 2.04PM
= 1404.
5.Press the button to confirm.
Line cord
to date and time.
2
, the
button to confirm.
8
Battery performance
To keep your batteries
in the best conditions,
leave the handset off
the base for a few hours
at a time (after the
initial 16 hour charge).
Please note however,
that new NiMH
batteries do not reach
full capacity until they
have been in normal
use for several days.
Running the batteries
right down at least
once a week will help
them last as long as
possible.
The charge capacity of
rechargeable batteries
will reduce with time
as they wear out, so
reducing the talk/
standby time of the
handset.
Eventually they will
need to be replaced.
New batteries can be
obtained from TecHelp
on 1300 369 193 or
your nearest electrical
retailer.
See
Things you need to
know on page 56 for
important information.