Getting Started; Location; Setting Up - Telstra 2400 User Manual

Getting started

7
WARNING
Do not place your Telstra 2400/2400a
in the bathroom or other humid
areas.
Handset range
The handset reception range from
the base is up to 300m outdoors and
up to 50m indoors. Thick walls can
severely affect the range.
Range indicator
The symbol on your handset display
indicates when you are in range of
the base. If the symbol flashes and
you hear a warning beep, you are out
of range and will need to move closer
to the base.
IMPORTANT
Do not connect the telephone line
until the handset(s) is fully charged.
The base must be plugged into the
mains power at all times.
Which socket?
Power socket
Telephone line socket
Battery low warning
When the battery charge is low the
handset battery icon will be empty
and flashing. Place the handset back
on the base to recharge.
Talk/Standby time
Under ideal conditions, fully charged
handset batteries should give up
to 10 hours talk time or 100 hours
standby on a single charge. See
'Battery performance' on the next
page.

Location

You need to place your Telstra 2400/2400a base unit within
2 metres of a mains power and telephone socket so that the
cables will reach.
Make sure it is at least 1 metre away from other electrical
appliances to avoid interference.
Your Telstra 2400/2400a works by sending radio signals
between the handset and base. The strength of the signal
depends on where you site the base. Putting it as high as
possible can help to provide the best signal.

Setting up

1. Plug the mains power cable into the base. Then plug the
power adaptor into the mains wall socket and switch the
power on.
The POWER/IN USE light on the base lights up.
2. Remove the battery compartment cover and insert the 2
x AAA NiMH batteries supplied into the handset. Slide the
battery compartment cover back into place.
Power
adaptor
cable