Troubleshooting - Energizer EN1100 User Manual

Best use of Battery Power
Make sure any appliances are energy efficient and turned off after use.
Use Compact Florescent Lamps. Wherever possible, charge with Solar
Panels or Wind Generators. Do not allow lead acid batteries to remain
discharged for long periods of time, they lose capacity (amp hours).
Disposal / Recycling of Inverter / California Proposition 65
Electronic products are known to contain materials that are toxic if
improperly disposed. Contact local authorities for disposal and recycling
information.
This inverter is certified to be "lead free." Transformers in this inverter
contain nickel composites. Nickel is a known neuro-toxin if ingested.

Troubleshooting

PROBLEM: No Input Voltage
Reason
Poor contact with battery
terminals.
Blown DC battery fuse(s).
PROBLEM: Inverter is Shut Down
Reason
Battery voltage below 10
Volts.
Inverter is too hot (thermal
shut down mode). Will be
indicated on LCD panel.
Unit may be defective.
Solution
Shut down inverter and
disconnect. Clean terminals
thoroughly and reconnect.
Turn off inverter. Fix problem.
Replace fuse(s) with same type
and rating.
Solution
Charge or replace battery.
Allow inverter to cool. Check
for adequate ventilation. Re-
duce the load on the inverter
to rated continuous power.
See warranty and call
customer service.
13