Network Printing - Xerox WorkCentre BookMark 40 Quick Manual

WorkCentre Bookmark 40 & 55
Output Option
– Basic Office Finisher Option
(available for BookMark 40 only)
Capacity
3
Sizes
Weights
Stapling
3
Output Option
– Office Finisher Option
Capacity
3
Sizes
Weights
Stapling
3
Hole Punch (Optional)
Output Option
– Convenience Stapler Option
Capacity
3

Network Printing

– SMart Controller
(Simultaneous rip, receive,
program ahead, queue
processing, and transmit)
Processor
Memory (ESS)
System Disk
Printer Language (PDL)
Auto Switching
Network Printing
– Resolution (printing via
CentreWare software)
Network Printing
– Printing Features
Advanced Features Included
Network Printing
– Print Driver Options
Paper Output
Paper capacities are based on 20 lb. bond stock; capacities will vary with different weight stocks.
3
Top Tray – 250 sheets
Stacking Tray – 1,000 sheets
4.25 x 5.5 in. (A6/105 x 148 mm) to 11 x 17 in. (A3/297 x 420 mm)
16 lb to 57 lb bond/80 lb cover (60 to 216 gsm)
30 sheets
Single position (top right hand corner)
Top Tray – 250 sheets
Stacking Tray – 2,000 sheets
4.25 x 5.5 in. (A6/105 x 148 mm) to 11 x 17 in. (A3/297 x 420 mm)
16 lb to 57 lb bond/80 lb cover (60 to 216 gsm)
50 sheets
Single (any corner) and dual
3-hole punch
2-hole Legal punch
50 sheets
1.4 GHz AMD Athlon dedicated
Copier/Printer: 256 MB
Copier/Printer: 80 GB Hard Drive shared
Copier/Printer
• PCL 6/PCL 5e
• PostScript 3 emulation
• TIFF (6.0 Old JPEG and New JPEG)
• TIFF Fax Extended (TIFF - FX)
• PDF
• LCDS, SCS, XES and IPDS through third party transforms
PostScript emulation: 600 x 600 dpi and 1200 x 1200 dpi (up to 256 shades of grey)
PCL: 600 x 600 dpi
Supports PCL and PS switching within job
Bi-directional Print Drivers
Embedded web server for remote control/monitor/setup
Job monitoring at the device and at desktop
Special font
Banner Sheet
Rotate Image
Offset
Job Type
• Secure, Sample, Delay
• LAN Fax-with fax option
• Save and Save & Print
Paper Selection by attribute (including transparency separators)
Duplex (2-sided)
Finishing
• Multiple Stapling positions
• Hole punch (if configured)
• Booklet creation
• Fit to new paper size
Output tray selections
Store and recall driver setting
Print Specifications
Detailed Specifications 3