Heat & Glo SL-350TRS-D Owner's Manual page 52

Mate shoulder screw with notch Mate shoulder screw with notch
Mate groove and grate tine Mate groove and grate tine
Figure 6 Figure 6
Log #4 (SRV2113-703): Locate the notch on the bottom of log # 4. Mate the notch with the shoulder screw that is located on the
burner top. Mate the rear groove with the far right grate tine as shown above. Apply the supplied lava rock as shown above.
52 Heat & Glo • SL-750TRS-IPI-E, SL-550TRS-IPI-E, SL-350TRS-D, SL-350TRS-IPI • 2120-900 Rev. D • 6/07
4 4
Figure 7 Figure 7
Lava Rock Lava Rock